Vulcan Thrasher Air Bike
Air Bike Description
Vulcan Thrasher Air Bike - ETA: 11/29
The Vulcan Thrasher Air Bike is a commercial-grade heavy-duty bike that can be utilized in any training environment. The robust steel frame and solid mechanics ensure it will last a lifetime with repeated use.
Air Bike Specifications:
*Measurements are approximations
Thrasher Frame:
Length: 44"
Width: 24"
Height: 55"
Weight: 137 lbs
Seat Length: 12"
Seat Height: 31" to 43"
Monitor Length: 12"
Belt driven
Equipped with wheels for easy transport
Water bottle included
Heart rate monitor included
Weight Capacity: 160 kilograms - 350 lbs
Air Bike Operation and Programs:
Quick Start Operation
Under the STAND BY display, the user can enter "QUICK START" mode by pressing the "START" button.
And then "TIME, DISTANCE, CALORIES" will ready to count up from zero.
After starting the machine, the level of resistance can be adjusted manually.
The system will pause counting TIME/DISTANCE/CALORIES if not receiving RPM signals. The system will continue previous counting once receiving RPM signal.
While using, pressing "STOP" button will cease the operation of the console.
Interval – Program
A. Under STANDBY DISPLAY, pressing "INTERVAL" button one time can enter default setting 20/10 program; pressing two times continuously can do the setting in Interval 20/10 program; pressing three times continuously can enter Interval Custom Program to set your own settings.
1. Setting interval laps on Interval 20/10 Program
Under operating status, when choosing Interval 20/10, Internal 0/10 display will blink, the user can do the setting using "UP/DOWN" button. Pressing "ENTER" when setting is finished and then press "START" to run the program.
2. The processing mode after "START"
When pressing "START" the program will operate based on WORK TIME 20 seconds/REST TIME 10 second, Interval takes record on each cycle until reaching the setting laps.
3. Setting Interval laps on Interval 10/20 program
Under STANDBY mode, when choosing INTERVAL 10/20 program, "INTERVAL 0/10" display will blink. Use "UP/DOWN" button to do the setting. Press "ENTER" when finishing the setting and then press "START" to start the work out.
4. Processing mode after "START"
When pressing “START” the program will operate based on WORK TIME 10 seconds/REST TIME 20 seconds, interval takes record on each cycle until reaching the setting laps.
5. Operation on INTERVAL CUSTOM mode
Under STANDBY DISPLAY when choosing “INTERVAL CUSTOM” “WORK TIME” will blink.
6. Setting “WORK TIME”
Use “UP/DOWN” button to set the time on “WORK TIME.” Press “ENTER” when finishing the setting, the program will switch to display on the next setting column.
7. Setting “REST TIME”
Use “UP/DOWN” button to set REST TIME. Press “ENTER” when the setting is finished. The program will switch to display on the next setting column.
8. Setting on INTERVAL LAPS
Use “UP/DOWN” button to set the interval laps. Press “ENTER” when the setting is finished. Press “START” to begin the work out.
9. The processing mode after “START”
When processing “START” the program will operate based on WORK TIME/REST TIME the user has set, Interval takes record on each cycle until reaching the setting laps.
Target Time – Program
B. Under STANDBY DISPLAY, pressing “TIME” program will enter the operation of this program.
1. Setting TIME
When choosing TIME PROGRAM and pressing “ENTER” the program will switch to the default time of 30 seconds in blinking display.
Press “UP/DOWN” button to set TIME or not change the default time, press “ENTER” to save the setting.
Pressing “START” if the SPM signal shows after pulling the string, the program starts operating.
2. The Processing mode after “START”
Under processing mode, TIME counts in decrement, DISTANCE/CALORIES counts in increment.
Console will stop functioning when pressing “STOP” during operation.
Target Distance – Program
C. Under STANDBY DISPLAY, press “DISTANCE” program to enter setting of this program.
1. Setting Distance
Choose DISTANCE program and press ENTER, program will switch to the default distance setting of 5.00 and display blinking
Press “UP/DOWN” button to set DISTANCE or not changing the default distance. Press “ENTER” to save the setting.
2. The Processing mode after “START”
Under processing mode, DISTANCE display counts in decrement, TIME/CALORIES count in increment
Console will stop function when pressing “STOP” during operation.
Target Calories – Program
D. Under STANDBY DISPLAY, press “CALORIES” program to enter setting of this program.
1. Setting CALORIES
Press “UP/DOWN” button to set CALORIES or not changing the default calories. Press “ENTER” to save the setting.
2. The Processing mode after “START”
Under processing mode, CALORIES display counts in decrement, TIME/DISTANCE counts in increment.
Console will stop function when pressing “STOP” during operation.
Target HR – Program
E. Under STANDBY DISPLAY, press “HR” program to enter the settings of this program.
1. Setting AGE
When pressing the HR program, console displays initial age setting of 30 years old. Pressing “UP/DOWN” button to set the age, press “ENTER” to save the setting. Press “START” to begin the work out.
2. The processing mode after “START”
Under processing mode, TIME/DISTANCE/CALORIES display counts in increment. Console will stop function when pressing the “STOP” during operation.
Check out the latest Thrasher Air Bike Review from Adam of Garage Gym Lab!
