V-Hammer Squat Stand II

V-Hammer Squat Stand II Description:

The V-Hammer Squat Stand II bridges the gap between a full power rack and a traditional squat stand. All the features of the Vulcan Hammer Squat Stand, with an adjustable pull-up bar. The V-Hammer Series are perfect for the professional training environment of elite athletic training facilities, collegiate and high school athletic gyms, or CrossFit® Affiliates and garage gyms.

V-Hammer Squat Stand II Specifications:

• Constructed of heavy duty 2.5" x 2.5", 8-Gauge Steel (4.28 mm), much thicker than 11-Gauge (3.175mm)
• Perfect for squats, bench press, shrugs, etc.
• Black Powder-Coated Finish
• 1" Holes with 2" spacing
• Heavy Duty one inch Black Oxide coated bolts, and laser engraved gussets give the Vulcan Hammer II a sleek and modern look as well as a very secure base
• V-Hammer II Stands can be bolted to the floor for added stability when doing heavy band work. Basic Kipping pull-ups can be performed on this stand without bolting to the floor
• Professional Grade 3/8" J-Hooks with 1.5" thick UHMW
• Weight Plate pegs are included and provide storage for weight. Easily attach and detach by hand with safety pins
• Safety Spotters Included (approximately 25" in Length), coated with 1.5" thick UHMW
• Capacity: Unlimited
• Dimensions: 93.5" x 48" x 50"
• Weight: 258 lbs
• Bolt together design allows the Vulcan Hammer II Squat Stand to ship flat
• You will need two one inch crescent wrenches or combination crescent wrench and socket with 1" socket. Use of a level is recommended when assembling uprights. Always assemble first then tighten/adjust evenly.
• Warranty: Lifetime

*CROSSFIT is a registered trademark of CrossFit, LLC. It is not affiliated with Vulcan Strength and has not endorsed any of our products.